Some customers don't know what to rely on when purchasing an electric push rod. Now, the electric window opener manufacturer tells you what things need to be confirmed so that the purchased product can be used properly.

Firstly, the electric push rod is used in conjunction with the equipment, so you need to know the pushing and pulling distance used in conjunction with the equipment. The size of the distance affects the choice of push rod model. The manufacturer of the electric window opener reminds you that the size of the push rod should be the size that the equipment can use, and do not buy it too large or too small, as it will not be able to operate the equipment perfectly.

Then it depends on the speed and load capacity of the electric push rod. You can think about the usage situation and compare the specifications to choose the most suitable one. The voltage is selected based on the control system and wiring of the device. If not available, a controller that is compatible with the power adapter can also be chosen. The electric window opener manufacturer's two matching controllers can also control the operation of the electric push rod.

Another important factor that can affect the usage time is the usage rate, which should generally not exceed 10%. If it is too high, it will shorten the usage time. In addition, it is necessary to check whether the push rod has torque or impact load during operation, and try to avoid such loads as much as possible. If there are special requirements, you can also talk to the technical personnel of the electric window opener manufacturer, and they will try their best to meet the customer's needs. When using an electric push rod, if it causes interference with the normal operation of the equipment, attention should be paid to possible malfunctions and they should be dealt with in a timely manner. There is a situation where the customer has their own power supply and controller, which requires them to install an overload detection device to ensure that the push rod can automatically cut off the power supply and control it properly when overloaded.